Cathodic Protection Transformer Rectifier FeSi Anód PCR Polarizációs Cella Petróleum Koksz

• Leírás
• Érdeklődés

Characteristics:

Power supplies are designed on the basis of the most modern production technologies of switching power supplies with IGBT elements. Efficiency course depending on power supply load is in wide range almost constant. They are characterized also by very good dynamic properties, very low output voltage ripple, high efficiency to 92% and low interference intensity thanks to perfect filters. Power supply output is short circuit proof and galvanically separated from the input.

Application:

In different industry areas, where are technological equipments eeded – switching power supplies. Examples of application: devices for galvanotechnology, water neutralization, eloxal coating, lectrophoresis surface treatment, electrochemical varnishing – “clean“, degreasing and any effective load.

Technical parameters of SZ 1500 15/400.3 A1000 B30
technology: switching power supply
Input voltage: 3NPE 400 V ±10%, TN - S
Input frequency: 47 to 63 Hz
Nominal output current: 1000 A
Nominal output voltage: 30 V DC
Ripple: 1% of output voltage
Adjustment range of output current and voltage: 1 to 100% of nominal value
Efficiency / power factor: 0,96 / 92%
Insulation strength: 2 kV AC input, output against frame; 4 kV AC transformer primary winding - secondary winding
Cooling: forced air
Protections: short circuit; wrong phase sequence; overloading; overheating
Weight approx.: 115 kg
Ingress protection: IP 20
Dimensions / box type: 490 x 1060 x 410 / B1.2 /W x H x D/ mm
Standard accessory of power supply with analog control:
- analog inputs (current loop 0-20mA or voltage signal 0-10V) for parameter adjusting (I, U) from the master control system
- analog outputs (current loop 0-20mA or voltage signal 0-10V) for parameter monitoring (I, U) from the master control system
- power supply output blocking by voltage free contact dimensioned for 24V AC/DC; 0,1A